Cypress CSC-1200T Especificaciones descargar pdf (Pagina 21)

Once in the command line interface (CLI) type 'telnet' along with the

IP address of the unit you wish to control (see below for reference).

This will bring us into the device which we wish to control.

Note: The IP address can be obtained from the OSD menu under

Information. If the IP is changed then the IP Address required for Telnet

access will also needs to be change accordingly.

Type '?' to list all the available commands (see below for reference).

Note: All commands will not be executed unless followed by a

carriage return. Commands are case-insensitive.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Cypress CSC-1200T Especificaciones Pagina 21